Snmp - Ricoh Aficio MP161 Network Manual

❖ Notify print job completion
msh> smb notif {on | off}
• To notify print job completion,
specify "on". Otherwise, specify
"off"
❖ Deleting Computer Name
msh> smb clear comp
❖ Deleting Group Name
msh> smb clear group
❖ Deleting Comment
msh> smb clear comment
❖ View Protocol
msh> smb protocol

snmp

Use the "snmp" command to display
and edit SNMP configuration settings
such as the community name.
❖ View settings
msh> snmp
• Default access settings 1 is as
follows:
Community name: public
IPv4 address: 0.0.0.0
IPv6 address:::
IPX address:
00000000:000000000000
Access type: read-only
Effective Protocol: IPv4/IPv6/
IPX
• Default access settings 2 is as
follows:
Community name:admin
IPv4 address: 0.0.0.0
IPv6 address:::
IPX address:
00000000:000000000000
Access type: read-write
Effective Protocol: Pv4/IPv6/
IPX
Remote Maintenance by telnet
• If "-p" is added, you can view
settings one by one.
• To display the current commu-
nity, specify its registration
number.
❖ Display
msh> snmp ?
❖ Community name configuration
msh> snmp "number" name
"community_name"
• You can configure ten SNMP
access settings numbered 1-10.
• The printer cannot be accessed
from SmartDeviceMonitor for
Admin or SmartDeviceMonitor
for Client if "public" is not reg-
istered in numbers 1-10. When
changing the community name,
use SmartDeviceMonitor for
Admin and SNMP Setup Tool
to correspond with printer set-
tings.
• The community name can be
entered using up to 15 charac-
ters.
❖ Deleting community name
msh> snmp "number" clear
name
❖ Access type configuration
msh> snmp "number" type
"access_type"
Access type
no
read
write
trap
Type of access per-
mission
not accessible
read only
read and write
user is notified of
trap messages
2
65