Changing Names And Comments - Ricoh Aficio MP161 Network Manual

C
To obtain status details, select the
machine in the list, and then click
[Open] on the [Device:] menu.
The machine status appears in the
dialog box.
D
Click [System] or [Printer].
The machine status appears in the
dialog box.
E
Quit SmartDeviceMonitor for Ad-
min.
Note
❒ For details about items in the di-
alog box, see SmartDeviceMon-
itor for Admin Help.
Changing Names and
Comments
Follow the procedure below to
change the names and comments of
the machine.
A
Start SmartDeviceMonitor for Ad-
min.
B
On the [Group] menu, point to
[Search Device], and then click
[TCP/IP], [IPX/SPX] or [TCP/IP
&SNMPv3].
A list of machines using the select-
ed protocol appears.
Select the protocol of the machine
whose configuration you want to
change.
If you are using TCP/IP SNMP v3,
enter the user authentication.
Using SmartDeviceMonitor for Admin
C
Select a machine in the list, and
then click [NIB Setup Tool] on the
[Tools] menu.
A Web browser opens and the
window for entering the login user
name and password for the Web
Image Monitor administrator ap-
pears.
NIB Setup Tool starts when the
network interface board is default.
Follow the instructions on the
screen.
D
Enter the login user name and
password, and then click [Login].
For details about the login user
name and password, consult your
network administrator.
E
Click [Configuration].
F
Click [System] on the [Device Set-
tings] area, and then change the
settings.
G
Quit Web Image Monitor.
H
Quit SmartDeviceMonitor for Ad-
min.
Note
❒ In the [Device Name] box, enter a
device name on the machine us-
ing up to 31 characters.
❒ In the [Comment] box, enter a
comment on the machine using
up to 31 characters.
2
41