Safety Rules - Hilti SF 151-A Operating Instructions Manual

Tool
Speed in 3rd gear
Torque (driving screw in soft material) set to
drilling symbol
Torque (driving screw in hard material) set
to drilling symbol
en
Torque range (15 settings)
Hammering speed
Hammer drilling in brick and masonry (max.
length 80 mm)
Noise and vibration information (measured in accordance with EN 60745):
Typical A-weighted noise power level for the
SF 151-A
Typical A-weighted noise power level for the
SFH 151-A
Typical A-weighted noise pressure level for the
SF 151-A
Typical A-weighted noise pressure level for the
SFH 151-A. Wear ear protection!
Uncertainty for the given noise level as per EN 60745 3 dB (A)
Typical weighted vibration at the grips for the
SF 151-A
Typical weighted vibration at the grips for the
SFH 151-A
Battery
Rated voltage
Capacity
Energy content
Weight
Temperature monitoring
Type of cell
No. of cells

5. Safety rules

NOTE
The safety rules in Section 5.1 contain all general
safety rules for power tools. The instructions at 5.1.2a,
5.1.2d, 5.1.2e, 5.1.3c and 5.1.4c are not relevant to
this tool.
5.1 General safety rules
WARNING! Read all instructions! Failure to follow all
instructions listed below may result in electric shock,
16
SF 151-A
Max. 33 Nm
Max. 70 Nm
2 to 12 Nm
88 dB (A)
104 dB (A)
77 dB (A)
93 dB (A)
Max. 2.5 m/s²
10 m/s²
SFB 150
15.6 V
2 Ah
31.2 Wh
0.94 kg
Yes
Nickel-cadmium SUB C size
13
fire and/or serious injury. The term "power tool" in
all of the warnings listed below refers to your mains
operated (corded) power tool or battery operated
(cordless) power tool. SAVE THESE INSTRUCTIONS.
5.1.1 Work area
a) Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
SFH 151-A
0 to 2,000 r.p.m.
Max. 33 Nm
Max. 70 Nm
2 to 12 Nm
36,000 b.p.m.
Diameter 1.5 to 6 mm
SFB 155
15.6 V
3 Ah
46.8 Wh
0.96 kg
Yes
Nickel-metal hydride SUB C
size
13