ORIGINAL OPERATING INSTRUCTIONS SF 151 A / SFH 151 A cordless drill/driver / cordless hammer drill/driver 1These numbers refer to the corresponding illustra- It is essential that the operating instruc- tions. The illustrations can be found on the fold-out tions are read before the power tool is op- cover pages.
Quick-release chuck Modification of the power tool or tampering with its parts is not permissible. To avoid the risk of injury, use only genuine Hilti 2.3 Switches accessories and insert tools. Speed-control switch Observe the information printed in the operating in-...
2.6 The items supplied include (toolbox versions): 1 Power tool with side handle 2 SFB 150 or SFB 155 battery 1 Charger 1 Operating instructions 1 Hilti toolbox 3. Insert tools, accessories Bit holder S-BH 50 Charger SFC 7/18 Charger...
Page 7
77 dB (A) for the SF 151-A Typical A-weighted emission sound pressure level 93 dB (A) for the SFH 151-A. Additional information in accordance with EN 60745 Triaxial vibration values (vibration vector sum) measured in accordance with EN 60745 2 2 Screwdriving without impact action, a <...
Battery SFB 150 SFB 155 Energy content 31.2 Wh 46.8 Wh Weight 0.94 kg 0.96 kg Temperature monitoring Type of cell Nickel-cadmium SUB C size Nickel-metal hydride SUB C size No. of cells 5. Safety instructions NOTE d) Do not abuse the cord. Never use the cord for The safety rules in section 5.1 contain all general carrying, pulling or unplugging the power tool.
Page 9
g) If devices are provided for the connection of c) Use power tools only with specifically desig- dust extraction and collection facilities, ensure nated battery packs. Use of any other battery these are connected and properly used. Use of packs may create a risk of injury and fire. these devices can reduce dust-related hazards.
Recharge the CAUTION battery immediately so that it is ready for reuse. Use only Hilti SFB 150 or SFB 155 batteries. Store the battery in a cool, dry place. Never store the battery where it is exposed to direct sunlight or...
6.2.2 Charging a previously used battery (forward/reverse switch in the middle position). Use CAUTION only the Hilti batteries approved for use with this Use only the Hilti chargers listed under “Insert power tool. tools, accessories”.
Page 12
7.4 Drilling 7.5 Hammer drilling (SFH 151-A) CAUTION 7.5.1 Fitting the drill bit In the event of the drill bit sticking, the power tool Set the forward / reverse switch to the middle will pivot about its own axis. Always use the power...
24 hours in normal Never operate the power tool when the ventilation mode or for 12 hours in conditioning mode. The Hilti slots are blocked. Clean the ventilation slots carefully C 7/36-ACS charger determines automatically when using a dry brush.
Dispose of defective batteries without delay. Keep them out of reach of children. Do not attempt to open or dismantle batteries and do not dispose of them by incineration. CAUTION Dispose of the batteries in accordance with national regulations or return them to Hilti. Printed: 07.07.2013 | Doc-Nr: PUB / 5070642 / 000 / 00...
Most of the materials from which Hilti power tools or appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back your old power tools or appliances for recycling. Please ask your Hilti customer service department or Hilti representative for further information.
12. EC declaration of conformity Hilti Corporation Designation: Cordless drill/driver / cordless hammer drill/driver Type: SF 151 A / SFH 151 A 2004 Year of design: Dietmar Sartor Roman Haenggi We declare, on our sole responsibility, that this Head of BA Quality and Process...
Need help?
Do you have a question about the SFH 151-A and is the answer not in the manual?
Questions and answers