Table of Contents
Advertisement
DX 460 SM powder-actuated tool
It is essential that the operating
instructions are read before the
tool is operated for the first time.
Always keep these operating
instructions together with the tool.
Ensure that the operating instruc-
tions are with the tool when it is
given to other persons.
Description of main parts
Gas return unit
Guidance sleeve
Housing
Cartridge channel
Unlock key power regulation wheel
Power regulation wheel
Trigger
Handle
Unlock key gas return unit
Aeration slots
Piston rings
Piston X-460-PSM (# 373303)
Buffer X-460-B (# 373 330)
Magazine MX SM (# 370 827)
* These parts may be replaced by the user/operator.
Contents
Printed: 08.07.2013 | Doc-Nr: PUB / 5129667 / 000 / 01
1. Safety rules
1.1 Basic safety instructions
In addition to the safety rules listed in the individual sec-
tions of these operating instructions, the following points
must be strictly observed at all times.
1.2 Only use Hilti cartridges or cartridges of equiva-
lent quality
The use of cartridges of inferior quality in Hilti tools may
lead to build-up of unburned powder, which may explo-
de and cause severe injuries to operators and bystan-
ders. At a minimum, cartridges must either:
a) Be confirmed by their supplier for successful testing
according to EU standard EN 16264
NOTE:
● All Hilti cartridges for powder-actuated tools have
been tested successfully in accordance with EN 16264.
● The tests defined in the EN 16264 standard are system
tests carried out by the certification authority using
specific combinations of cartridges and tools.
The tool designation, the name of the certification aut-
hority and the system test number are printed on the
cartridge packaging.
or
b) Carry the CE conformity mark (mandatory in the EU
as of July 2013).
See packaging sample at:
www.hilti.com/dx-cartridges
1.3 Use as intended
The tool is designed for professionals for fastening pro-
filed metal roof and floor decking to open web steel joists.
Page
1
1.4 Improper use
● Manipulation or modification of the tool is not per-
2
missible.
3
● Do not operate the tool in an explosive or flammable
4
atmosphere, unless the tool is approved for such use.
6
● To avoid the risk of injury, use only original Hilti fas-
6
teners, cartridges, accessories and spare parts or those
7
of equivalent quality.
● Observe the information printed in the operating
8
instructions concerning operation, care and mainte-
9
nance.
11
● Never point the tool at yourself or any bystander.
12
● Never press the muzzle of the tool against your hand
12
or other part of your body.
12
● Do not drive nails into materials like glass, marble,
13
plastic, bronze, brass, copper, natural rock, insulation
en
1
Hide quick links:
Advertisement
Table of Contents
