Hilti SF 10W-A18 Manual
Hide thumbs
Also See for SF 10W-A18:
- Operating instructions manual (22 pages) ,
- Operating instructions manual (14 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Hilti SF 10W-A18
Summary of Contents for Hilti SF 10W-A18
- Page 1 SF 10WA18 English Français Español Português...
- Page 5 SF 10WA18 Original operating instructions ........Mode d'emploi original .
- Page 6 1.3 Product information Hilti products are designed for professional use and may be operated, serviced and maintained only by trained, authorized personnel. This personnel must be informed of any particular hazards that may be encountered.
- Page 7 2 Safety 2.1 Warnings The purpose of warnings Warnings alert persons to hazards that occur when handling or using the product. Description of the key words used DANGER Draws attention to imminent danger that will lead to serious personal injury or fatality. WARNING Draws attention to a potentially dangerous situation that could lead to serious personal injury or fatality.
- Page 8 ▶ Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. ▶ Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
- Page 9 ▶ If the battery is too hot to touch it may be defective. In this case, place the power tool in a non- flammable location, well away from flammable materials, where it can be kept under observation and allowed to cool down. Contact Hilti Service after the battery has cooled down.
- Page 10 If the battery display LEDs blink, please observe the instructions given in the Troubleshooting section. 3.5 Items supplied Drill / driver, side handle, operating instructions. Note Spare parts, consumables and accessories approved by Hilti for use with the product can be found at your local Hilti Center or online at: www.hilti.com...
-
Page 11: Operation
4 Technical data Rated voltage 21.6 V Weight 6.0 lb (2.7 kg) Speed 1st gear 0 rpm … 310 rpm 2nd gear 0 rpm … 530 rpm 3rd gear 0 rpm … 1,210 rpm 4th gear 0 rpm … 2,100 rpm Torque range (15 settings) 1 ftlb …... - Page 12 5.4 Fitting the side handle CAUTION Risk of injury. The drill/driver may start inadvertently. ▶ Make sure that the forward / reverse switch is in the middle position (safety lock engaged) or that the battery has been removed from the drill / driver. ▶...
-
Page 13: Troubleshooting
Note To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare parts, consumables and accessories approved by Hilti for use with the product can be found at your local Hilti Center or online at: www.hilti.com 6.2 Care of the Li-ion battery... - Page 14 Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information.
- Page 15 Hilti = registered trademark of Hilti Corp., Schaan Pos. 3 | 20150921...