Loudspeaker / Volume / Cursor Mode / Trace / Marker / Trigger; Rear Panel; Amplifiers; Amplifier Modules: 3, 4, 6, And 8 Channels - natus Dantec Keypoint G4 User's And Service Manual

Loudspeaker / Volume / Cursor Mode / Trace / Marker / Trigger

Rear Panel

LINK

Amplifiers

Amplifier Modules: 3, 4, 6, and 8 Channels

Loudspeaker Mute Key / Indicator
Press the Loudspeaker Mute key to switch between the On and Off function.
The yellow light (LED) indicates the loudspeaker is muted.
To adjust the volume, see the Control knob function below.
Volume Indicator
The green light (LED) indicator is on when the volume function is enabled – see the Control knob function
below.
Volume / Cursor Control Knob
Press the Control knob to switch between the Volume and the Cursor Mode functions.
When Volume is enabled, rotate the knob to adjust the volume level.
When Cursor Mode is enabled, rotate the knob to move the traces / markers or the trigger cursor.
Cursor Mode Indicator
The green light (LED) indicator is on when the cursor mode is enabled.
When enabled, it allows movement of the Trace / Marker or the trigger cursor with the use of the control knob
–see the control knob function above.
Trace / Marker / Trigger Arrow Keys
In NC; F-Wave; and H-Reflex Applications:
The Up and Down arrow keys select the active trace.
The Left and Right arrow keys select the active cursor.
In EMG Application:
The Up and Down arrow keys move the trigger cursor in small steps.
The Left and right arrow keys move the trigger cursor to the left and to the right.
HS Link Input Connector - Connection Panel (internal)
23