Getting Started With Accuscreen; Switch On Accuscreen; Power-Saving Mode And Automatic Power-Off; The Accuscreen Screens - natus Madsen AccuScreen User Manual

3 Getting Started with AccuScreen

3 Getting Started with AccuScreen
In the following, you will find quick instructions on how to use AccuScreen:
• Switching on AccuScreen
• Adding new patients
• Finding patients
• Editing patient data
You will find detailed instructions for preparing and testing in:
• Preparing for testing
• Testing with AccuScreen
3.1

Switch on AccuScreen

1. Switch on AccuScreen: Press the
A start-up screen is shown, while AccuScreen performs a self-test.
The start-up screen shows the name of the device.
The AccuScreen name is configurable (see the AccuLink User Manual).
3.1.1

Power-saving mode and automatic power-off

If you do not use AccuScreen for a certain period of time, AccuScreen will first switch to power-saving mode, and finally
switch off automatically. These periods are configurable (see the AccuLink User Manual).
• When AccuScreen is in power-saving mode, the display goes black and the power indicator lights up green.
• Simply touch the screen to reactivate AccuScreen.
3.1.2

The AccuScreen screens

Important
default selection and sequence of screens is shown. This is configurable; see the AccuLink User Manual.
• Main instructions for data entry screens are described in
– Entering data in AccuScreen
• Buttons are described in
– Function buttons
– General buttons
20
►
28
► 37
On/Off
• The screens shown in your AccuScreen depend on the configuration of AccuScreen. In the following, the
► 74.
► 75
► 76
switch.
A. On/Off switch
MADSEN AccuScreen