Rear Panel; Ep Amplifier Module - 6 Channels - natus Dantec Keypoint G4 User's And Service Manual

Rear Panel

LINK
LINK
EP Amplifier Module ― 6 Channels
Patient Ground Connector / Indicator
Connect the patient's ground electrode to the green connector.
The green light (LED) indicates the results of the impedance test. –See the LED Status and
Results description under the Active Electrode Indicator.
Patient Ground Connector / Indicator
Connect the patient's ground electrode to the green connector.
The green light (LED) indicates the results of the impedance test. –See the LED Status and
Results description under the Active Electrode Indicator.
HS Link Input Connector － Connection Panel (internal)
HS Link Output Connector － Current Stimulator Connection
Linkport
HS
HS Linkport allows an extra module connection (e.g. stimulator). To open the HS Linkport li, use a tool (e.g.
small screwdriver).
Power ON Indicator
The green light (LED) indicates that the amplifier power is On.
Amplifier Input (isolated)
All amplifier input connectors are electronically isolated
Impedance Test Key / Indicator
Press the Impedance Test key to start the impedance measurement.
25