natus Dantec Keypoint G4 User's And Service Manual page 47

MUPs Page
The MUPs page displays the recordings / epochs. The MUPs are broken down into single units by a vertical line as shown in the figure below.
A zoom-in on one of the MUPs.
The following functions become available when the cursor is placed over a MUP:
Click to delete the MUP. The MUP is then marked with a red cross.
•
• Click to open the MUP in the MUP Edit view.
• Click and drag a marker to adjust. This is performed in a zoom window.
• The vertical dividing line (A) indicates the end of a MUP recording. Click at a marker to show this MUP in adjust mode.
A
47