Nicolet Cortical Stimulator
Block diagrams
OR probe biphasic
mode
2-14
Following are five possible connection configurations for the Nicolet Cortical
Stimulator option:
1.
OR Probe Biphasic Mode
2. OR Probe Biphasic Mode - Nicolet Desktop
3. Electrode Switching Mode - Nicolet Desktop
4. Electrode Switching Mode - Nicolet Panel PC
In this configuration, the Stimulus Control Unit (SCU) is an independent device
and does not require the Nicolet application. EEG data is not collected in this
configuration. In this configuration, you set up stimulus parameters and control
delivery of stimulus from the Stimulator Control Unit (SCU) control panel.
Stimulus to the patient is delivered from the Stimulus Control Unit (SCU) via a
hand held bipolar probe.
A
Stimulus Control Unit (SCU) Medical Power Supply
B
Stimulus Control Unit (SCU)
C
Bipolar Probe
A
B
C
Revised 11/21/18