Charger Led Indications; Charging The Bluetooth Headset - Motorola CLP Series User Manual

Figure 9: Charging Radios
3.9

Charger LED Indications

On the drop-in charger, the radio charging pocket has an LED Charger.
On the Multi-Unit Charger (MUC), each of the six charging pockets has an LED. The LEDs are
grouped into pairs to indicate which charging pockets are paired.
NOTE: You can clone up to two source radios and two target radios using MUC. For more
information on cloning, see
For part number details, see
Table 6: Charger LED Indicator
Status
Battery is charging
Battery is fully charged
1
Battery Fault
NOTE: The LED is red when the battery is charging. It turns green once the battery is
fully charged.
3.10

Charging the Bluetooth Headset

Follow the procedure to charge bluetooth headset with CLP Series Drop-In Tray Multi-Unit Charger
(MUC) and cloning cable. This is an optional accessory.
1
Re-seat the battery pack to correct the faulty battery issue.
Radio Cloning on page
Accessories on page 47.
LED Indication
Steady Red
Steady Green
Blinking Red
Chapter 3 : Battery and Charger
31.
68012000044-ED
25