Bluetooth Wireless Accessory; Adding Bluetooth Headset; Reconnecting To The Last Connected Bluetooth Headset - Motorola CLP Series User Manual

2.3

Bluetooth Wireless Accessory

This section provides information regarding bluetooth wireless accessory.
2.3.1

Adding Bluetooth Headset

The following are the steps for initial pairing
Prerequisites: Turn the radio off.
Procedure:
1 Put the bluetooth headset in pairing mode. Refer to your Bluetooth headset instructions leaflet.
2 Press and hold the PTT button and Power button simultaneously until your radio shows the blue
LED.
Table 1: LED Configuration
User Mode
Bluetooth Pairing Mode
Pairing Successfully
Bluetooth Disconnected
Pairing Fail or Timeout
NOTE: The Bluetooth feature is disabled when the wired audio accessory is plugged into
the accessory connector on the CLP radio.
2.3.2

Reconnecting to the Last Connected Bluetooth Headset

Prerequisites: Ensure the Bluetooth headset is turned on.
Procedure:
1 Turn the radio off.
2 To turn on the radio, press the Power button.
LED Status
Last connection-fast blinking
blue
Add or erase - solid blue
Blue/purple blinks for 5 sec-
onds
Red/purple blinks until the
radio reconnects
Red/purple blinks until the
radio reconnects
68012000044-ED
Chapter 2 : Getting Started
Color
13