Charging A Stand-Alone Battery With The Drop-In Tray Charger; Estimated Charging Time; Charging Radio With The Drop-In Tray Suc - Motorola CLP Series User Manual

Item Number
1
3.6.1

Charging a Stand-Alone Battery with the Drop-in Tray Charger

Procedure:
1 To charge the battery, insert the connector of the power supply into the micro Universal Serial
Bus (USB) port on the front of the drop-in tray charger.
2 Connect the power supply to a proper AC outlet.
3 Insert the battery into the tray, with the inside surface of the battery facing the front of the
charger. See Stand-Alone Battery on page
4 Ensure that the slots in the battery are correctly engaged in the charger.
3.6.2

Estimated Charging Time

The following tables provide the estimated charging time of the battery.
Table 5: Estimated Charging Time
Charging Solution
Single Unit Charger
Multi-Unit Charger
3.7

Charging Radio with the Drop-in Tray SUC

Procedure:
1 Place the drop-in Tray Single Unit Charger (SUC) on a flat surface.
2 Insert the connector of the power supply into the Micro USB port on the front of the drop-in tray
charger.
3 Connect the correct power supply to a proper AC outlet.
4 Insert the radio with battery installed into the tray, facing down and making sure that the
charging contacts on the charger are aligned with the contacts on the radio.
Description
Micro-USB port
22.
Battery Type
Standard Lithium-Ion Bat-
tery
4 hours
2.5 hours
68012000044-ED
Chapter 3 : Battery and Charger
High Capacity Lithium-Ion
Battery
5.5 hours
4 hours
23