Table of Contents
Advertisement
All set-ups involving FISHF'INDING displays or features are grouped
together in the FISHFINDING MENU.
Set-ups involving the PLGT/IRMP mode can be accessed by choosing
These include track line control and plot display contents.
Set-ups involving the
.
NAVIGATION MENUS
Set-ups involving the general ECHOSOUNDER SYSTEM, such as inputs/out-
puts or units of measure, can be accessed by choosing the SYSTEMMENUS.
3.4.1 F'ISHFTNDING Menu
3.4.1.1 White Line
White line is normally used to provide better
separation of bottom and fish schools near the
bottom. In addition, the White line can be helpful
determining bottom conditions. A line line at
in
the top edge of the bottom echo usually indicates
hard bottom conditions such as sand or rock. A
wider line may indicate softer bottom conditions
such as grass or mud.
Generally the color echo sounder display provides good definition and
separation simply due to the color differentials. However in some condi-
tions, the use of White Line
mation useful in your fishing plan. When
color is replaced by the background blue color.
To turn the White Line Mode ON or OFF, press the/E[key and select
from the M
is switched ON or OFF each time the softkey is pressed. Press thel[
key again to return to the previous display mode.
To turn the AUTO
display can be accessed
NAVIGATION
These setups effect the position or bearing readouts.
may provide
I
menu. On the FISHFINDING menu, press the
A
N
Mode ON or OFF, press theF[key and select
GAIN
choosing the
WHITE UNE
ON
AUTO GAIN
ON
SIMULATOR
some additional important infor-
is ON, the bright red
WHITE LINE
AUTO GAIN
OPERATION 75
OFF
OFF
OFF
LINE
is
Hide quick links:
Advertisement
Table of Contents
