Editing Routes; Gps Mode - Raytheon V8010 Operation Manual

Routes
3.4.4.1.4 Editing
All editing of route plans is done via the
were looking through the List Route display, just press the p4i
MAKE
When using the
Plan is fairly simple. Use the 4 (Left )or b (Right) direction keys to bring
the leg number containing the waypoint to be deleted back to the
Press them softkey to delete the incorrect waypoint. The Route legs will
be re-numbered with the deleted waypoint being omitted from the list.
To insert a waypoint into a route plan, use the
the leg number where the new waypoint should be
inserted into the entry box. Pressland type in
the number of the new waypoint. The new way-
point will be added to the route plan and the Route
legs will be re-numbered accordingly.
Deleting Route Plans
The method for deleting a route plan is to delete
all waypoint legs in the plan individually. The
process to delete individual waypoints is the same as used in the route
editing procedure. In this case, simply delete all of the points appearing
in the route plan by following the same procedure used above for editing.
First, verify that you are deleting the correct route plan #
sleeves and start pressing them
empty (shows '0OOs"in the route).
3.5

GPS MODE

In the event that the optional GPS sensor has been installed with the
operations built into this unit.
OPERATION 96
just want to return to previous display mode.
ROUTE
screen, removing waypoints from a Route
ROUTE dis la
MAKE
MAKE
MAKE ROUTE
HOME N 42 42.34
1003 LT
PRESS MENUTO RETURN
Roll up your
until all of the waypoint legs are
. So
key.
entry box.
W071 25.10
wo71 02.15
N 41 41.19