Raytheon V8010 Operation Manual page 133

To Follow a route lan in a 'Forward" or 'Reverse" direction, press the
softkeyto select
tirst. The block enclosing themode[indicates the
To activate a route sequence- chaos either "Automatic" or
route
sequencing. Press the IAvn>l softkey for automatic route
sequencing. Press the m softkey for manual Route sequencing. If you
just press-1 without making this choice, multiple beeps will be heard
when the key is pressed.
The difference between "automatic" or "manual" route following (or se-
quencing) is that in "automatic" the V8010 will automatically switch to the
next waypoint in the route plan when the arrival alarm point has been
reached. In 'manual" sequencing, the operator must switch to the next
destination in the route plan anytime after the arrival warning has sounded.
Once you have selected auto or manual route sequence, the display will
change to the
of an arrival alarm distance point at which the V8010 will alert you. If in the
"automatic" route sequence mode, the V8010 will advance to the next
Use the numeric keypad to enter the desired arrival distance.
Example: Press 0,0,5, and m for a 0.05 NM arrival zone.
When wl is pressed, the display returns to
ROUTE MENU page
the
operations. Route Sequence will now be "0N"and
the first leg of the selected route will be displayed
as the desiuation waypoint on the Navigate-Posi-
tion page in the waypoint block, if you are not
already at the first point in the route plan. If the
leg will be indicated on the Navigate-Position
screen.
OPERATION 92
if wish to go from the first waypoint to last. Select
s e l e
page. The Set Alarm screen prompts for the entry
provide
only
for any other Route Plan
c t i o n .
a visual and audible warning.
ARRIVAL