Heading In; Speedin; Units - Raytheon V8010 Operation Manual

HEADING IN

To select the type of
the desired choice appears in the boxon the display. The choices are:
SHIPS HD = This selects input of heading from a flux sensor using
either the ~~~~senten~e from the
COGMAG = This chooses the Magnetic COG course information from
the external navaid.
from the external navaid.

3.6.1.4 SPEEDIN

Normally, the Fishfinding and Navigation displays show the the paddle-
wheel speed readout. If you would prefer to see the GPS or external navaid
calculated Speed-Over-Ground (SOG) readout on the various displays,
press the m key and select-l. Then press the~INPUT/OUTPUT~
(Speed over Ground). If you select ?HRU WIW, the paddlewheel speed
output is selected for display.
used.
The UNITS menu permits the operator to select
different units of measure for depth, temperature,
speed, and language. To change any of these units,
press them key. Press the softkey to select
with the softkey.
3.62.1 Selecting Units of Depth
The
oms (FM), or Meters (M) or in soecialoroaramma-
ble units (SP). The "sele&ed"depth unit characters
Heading Input,
press the [T softkeyuntil
0183 data or SEATALK data.
NMEA
UNITS MENU
I
q
SP
KTS
KTS MRI KPH
ENG
PRESS MENU TO RETURN
OPERATION 107