Nav Alarms - The Set Alarm Menu - Raytheon V8010 Operation Manual

For navigating to waypoints, the V8010 has operator programmable
alarms that you can set to advise you when the specified limits have been
reached. The types of
Quick access to set, change, or cancel these alarms
anytime is gained bypressingthemey. When the
key.
3352.1 The ARRIVfi Alarm
When the
the
SET
alarm can be set to alert you when you are within
VAL
a specified distance from your waypoint destination.
The arrival alarm can be set anywhere between 0.01
up to 9.99 nautical miles (nm). To set an
alarm:
Press the m softkey. Enter the distance
value for the desired arrival zone with the numeric
keys along the left side of the panel. Press m.
Example: To set an arrival zone at 0.05 nautical miles;
Press themkey again to return back
to the previous operating mode.
Whenever the
ARRIVAL dam
the distance to the waypoint equals the
alarm value, the alarm will be activated.
An audible beeper will sound and a mes-
OPERATION 62
Alarm Menu
Set
alarms available are:
NAV
Arrival at a waypoint.
Exceeds
anchor drift
Straying too far from track.
Avoiding a designated area.
menu appears. Now, the
0
,0 ,5 ,I-[.
is set and
limit.
-
ARRI
ARRIVAL
PRESS *.LARI TO RnuiDl
VESSEL CONTACTS
,
.
NAV
ALARMS