Using the firmware selection menu
1.1
Open firmware selection menu
Procedure
1. Switch on the device or restart the device.
Note
The following message appears briefly after the device is switched on:
Press ESC for boot options
2. Immediately after switching on the device, press the <Esc> button and hold it down.
Open firmware selection menu manually
Note
Windows®10 operating systems: Alternative procedure for opening the firmware selection
menu
If you do not open the firmware selection menu after starting the device with the <Esc> key,
follow these steps:
1. Start Windows®10.
2. Press the <Shift> key and keep it pressed.
3. Select "Restart".
The "Chose an Option" window opens.
4. Select the "Troubleshoot" option.
5. Select "UEFI / Firmware Settings".
6. Click "Restart".
Result
The "Main Page" with the options of the firmware selection menu (Page 8) is open.
Firmware/BIOS description SIMATIC IPC127E
Operating Instructions, 01/2019, A5E45911216-AA
1
7