Table of Contents
Advertisement
Fig. 11
c)
Unhook the burner heat shield from the L/H & R/H retaining holes and
lift forward to remove, as shown below in fig. 12
Fig. 12
d)
Remove the four burner retaining screws, disconnect the pilot assy. and
lift the burner clear
18
Front bezel
retaining screws
(1 off each side)
Burner retaining
screws (2 off at
each end of
burner)
Burner Heat
Shield is
removed by
unhooking
from the
holes as
shown
Advertisement
Table of Contents
