Figure 52 Left side panel
(1) Primary grounding point
HP 5930-2Slot+2QSFP+/HP 5930-2Slot+2QSFP+ TAA
Figure 53 Front panel
(1) Interface module slot 1
Figure 54 Rear panel
(1) USB mini console port
(3) Fan tray slot 1
(5) Power supply slot 1
(7) QSFP+ port
(9) System status LED (SYS)
(11) Management Ethernet port
The HP 5930-2Slot+2QSFP+/HP 5930-2Slot+2QSFP+ TAA switch comes with interface module slot 1
empty and interface module 2 installed with a filler panel. You can install one or two interface modules
for the switch as needed. In
module slots. For more information about installing and removing interface modules, see
"Installing/Removing an interface
The HP 5930-2Slot+2QSFP+/HP 5930-2Slot+2QSFP+ TAA switch comes with the two power supplies
empty and a filler panel as an accessory. You can install one or two power supplies for the switch as
needed. In
Figure
information about installing and removing power supplies,
Figure
53, two LSWM18QC interface modules are installed in the interface
module."
54, two 650W AC power supplies are installed in the power supply slots. For more
(2) Auxiliary grounding point 1
(2) Interface module slot 2
(2) USB port
(4) Fan tray slot 2
(6) Power supply slot 2
(8) QSFP+ port LED
(10) LINK/ACT LED for the management Ethernet port
(12) Serial console port
"Installing/removing a power
46
supply."