Erase All Settings, Software Reset - RADEMACHER RolloTron Swivel Winder Comfort 1500 Operating And Assembly Manual

i

17. Erase all settings, software reset

If necessary, you can erase all of your settings and return
the RolloTron Swivel Winder Comfort system to its origi-
nal factory settings.
1.
Remove the cover plate from the setting buttons.
+
2.
M OK
+ + +
Simultaneously press and hold the four buttons for
4 seconds.
-
3.
This displays the software version for the RolloTron
Swivel Winder Comfort.
Example
4.
After four seconds all icons on the display will
light up.
5.
Release the buttons and all of the settings will be deleted;
the installation wizard will appear automatically.
6.
Carry out the initial settings in the installation wizard,
see page 31.
EN
47