RADEMACHER RolloTron Swivel Winder Comfort 1500 Operating And Assembly Manual page 33

i
14. Initial commissioning with the help of the installation wizard
6.
Set the upper end point.
6.1
Press and hold the Up button.
The roller shutter travels up.
6.2
Tighten the belt slightly, until it is ten-
sioned by the weight of the roller shut-
ters.
6.3
Release the Up button, as soon as the
roller shutter reaches the desired position
for the upper end point.
The roller shutter stops.
6.4
If necessary, the upper end point can be
/
corrected once more.
OK
6.5
Save the upper end point.
Setting the wrong upper end point may lead to over-
load or damage the RolloTron Swivel Winder Comfort
or the drive.
◆ Do not set the upper end point right up to the limit
stop.
◆ Release the Up button promptly and never allow it
to extend beyond the respective end point.
7.
Next the lower end point must be set, see
the next page.
i
Please ensure that the belt is not excessively
slack when reaching the lower end point.
ATTENTION!
EN
33