RADEMACHER RolloTron Swivel Winder Comfort 1500 Operating And Assembly Manual page 49

i
18. Removing the RolloTron Swivel Winder Comfort (e.g. in the event of a move)
8.
Remove the reel compartment cover and check the
position of the fastening hook.
9.
If necessary, move the fastening hook into an easily
accessible position.
9.1
For this, plug the mains cable into the RolloTron Swivel
Winder Comfort and into the socket.
There is a risk of injury from the reel.
◆ Never reach into the reel compartment when the
motor is running.
◆ Always remove the mains plug before touching the
reel compartment.
10.
Finally, remove the mains plug again from the socket.
11.
Release the belt from the fastening hook and pull
it out of the RolloTron Swivel Winder Comfort from
above.
12.
Finally, unscrew the wall bracket.
CAUTION!
EN
49