12.17
Removing front fender
12.18
Installing front fender
12.19
Removing the air filter
SERVICE WORK ON THE CHASSIS 12
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Remove screws
–
Remove screws
F00594-10
Main work
–
Position front fender. Mount and tighten screws
Guideline
Remaining screws,
chassis
–
Mount and tighten screws
Guideline
Remaining screws,
F00595-10
chassis
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
Preparatory work
–
Remove the seat. (
Main work
–
Remove screws
–
Remove the upper part of the air filter box
V00498-10
1
.
2
and take off the fender.
M6
10 Nm (7.4 lbf ft)
2
.
M6
10 Nm (7.4 lbf ft)
p. 92)
p. 52)
1
.
2
p. 89)
1
.
p. 89)
.
55