Changing The Fuses Of Individual Electrical Power Consumers - Husqvarna TE 250 Owner's Manual

15.5

Changing the fuses of individual electrical power consumers

Info
The fuse box containing the fuses of individual electrical power consumers is located under the seat.
–
Take off protection caps
–
Remove faulty main fuse
Info
A faulty fuse has a burned-out fuse wire
A spare fuse
–
Insert a new main fuse.
Fuse (58011109120) (
–
Check that the electrical system is functioning properly.
Tip
Insert a spare fuse so that it is available if needed.
–
Attach the protection caps
–
Mount starter relay
S04852-10
–
Mount the EFI control unit
S04846-12
Finishing work
–
Mount the seat. (
–
Install the air filter box cover. (
Preparatory work
–
Remove the air filter box cover. (
–
Remove the seat. (
Main work
–
Open fuse box cover
–
Remove the faulty fuse.
H03747-10
ELECTRICAL SYSTEM 15
4
.
5
.
A
6
is located in the starter relay.
p. 150)
4
.
3
onto the holder and route the cable.
1
on the rubber lugs
p. 67)
p. 68)
p. 68)
p. 67)
1
.
.
2
.
109