Chapter 2: Using The Wheel Pilot; Overview - Raymarine ST3000 Owner's Handbook Manual

Chapter 2: Using the Wheel Pilot

Chapter 2: Using the Wheel Pilot

2.1 Overview

WARNING:
Passage making under autopilot control is an enjoyable
experience that can, if you are not careful, lead to the relaxation
of the permanent watch. Always maintain a permanent watch no
matter how clear the sea may appear to be.
•
•
•
•
•
The wheel pilot always powers up in Standby mode (indicated by
a flashing ' C ' alongside the boat's current compass heading).
The wheel pilot is controlled using simple push-button
operations. The control unit confirms all button presses with a
short beep. In addition to the main single key functions, there are
several dual key operations.
To select automatic steering:
• steady the boat on the required heading
• engage the wheel drive clutch
press AUTO : the display will then show an ' A ' alongside the
•
current heading
To return to manual steering at any time:
press STANDBY
•
• disengage the clutch lever
You can use the -1 , +1 , -10 , and +10 keys to make course changes
when the boat is under autopilot control.
9
D5608-1