Seatalk® Pilot Controller Connection - Raymarine EVOLUTION EV-1 Installation Instructions Manual

4.5 SeaTalk® pilot controller
connection
The SeaTalk® to SeaTalkng® converter can be used
to enable control of SeaTalkng® autopilots using
legacy SeaTalk® pilot controllers. Other SeaTalk®
devices can be connected to the SeaTalkng®
backbone in the same way.
1. SeaTalkng® MFD (MFDs require a separate
power supply.)
2. SeaTalk® to SeaTalkng® adaptor cable
(A22164)
3. SeaTalk® pilot controller (powered from the
SeaTalkng® backbone.)
4. SeaTalkng® autopilot
5. SeaTalkng® 12 V dc power supply connection
6. SeaTalk® to SeaTalkng® converter
Cables and connections 41