Warning Messages In Track Mode - Raymarine ST3000 Owner's Handbook Manual

24

Warning messages in Track mode

Track data not received
Track data error
Large cross track error
Waypoint advance
The waypoint advance alarm sounds whenever the target waypoint
number changes:
•
•
•
Note: Waypoint advance will only operate if your pilot receives valid
bearing to waypoint and waypoint number information.
ST3000 Wheel Drive Autopilot - Owner's Handbook
the pilot continues on its current heading, and the display
alternates between the bearing to the next waypoint and the
direction the boat will turn to take up that bearing
make sure that the turn will be safe and, when you are ready to
make the turn, momentarily press -10 and +10 together.
the pilot will turn onto the new bearing and track towards the next
waypoint
The wheel pilot displays this message if you
select Track mode when the autopilot is not
receiving SeaTalk navigation data.
The wheel pilot displays this message if you
select Track mode when the navigator has
lost its fix.This display will clear as soon as
the navigator regains its fix.
This alarm sounds if cross track error
exceeds 0.3 nm.
D208-2