Section 4 - Specifications; Serial Number And Rating Label Location; Weld, Power, And Engine Specifications; Environmental Specifications - Miller Bobcat 225 Owner's Manual

4-1.

Serial Number And Rating Label Location

The serial number for this product is located on the front. The rating information for this product is located on the back. Use rating label to deter-
mine input power requirements and/or rated output. For future reference, write serial number in space provided on back cover of this manual.
4-2.

Weld, Power, And Engine Specifications

�
This equipment will deliver rated output at an ambient air temperature up to 104°F (40°C).
Weld Output
Welding Mode
Range
CC/AC 60 - 160 A
CC/DC 40 - 225 A
CV/DC 19 - 28 V
4-3.

Environmental Specifications

A. Temperature Specifications
Operating Temperature Range*
–20 to 104°F (–29 to 40°C)
*Output is derated at temperatures above 104°F (40°C).
4-4.

Regulatory Approval

This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions:
1. This device may not cause harmful interference, and
2. This device may accept any interference received, including interference that may cause undesired operation.
WARNING! Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
this device.
Reception of the fob and receiver signal can be affected by the weather, environment, and/or area conditions.
OM-286503 Page 18
�
Complete Parts List is available at www.MillerWelds.com
SECTION 4 – SPECIFICATIONS
Rated Welding Maximum Open-
Output Circuit Voltage
150 A, 25 V,
100% Duty Cycle
225 A, 25 V,
100% Duty Cycle
200 A, 20 V,
100% Duty Cycle
Generator Power
Rating
80
Peak: 11.0 kVA/kW
Continuous: 9.5 kVA/
80
kW Single-Phase 80/
40 A, 120/240 VAC 60
33
Hz (while not welding)
Storage/Transportation Temperature Range
–40 to 131°F (–40 to 55°C)
Fuel Capacity Engine
Kohler CH730
Air-Cooled,
12 gal (45 L) Two-Cylinder,
Tank Four-Cycle,
23.5 HP Gaso-
line Engine