urmet domus Mininote+ 1722/85 Installation Manual page 8

All manuals and user guides at all-guides.com
To do this, use the 'Delete Unused Connections' item, available from the higher-level menu
reachable through the icon M 24.
Delete Unused Connections
If the button controls a single receiver, this option can be useful if that receiver is replaced. First,
connect the new receiver with Connect (or disconnect) (see above). Then use this menu item to
delete the connection to the old receiver. Controlled by E21.
and
By default, the Yokis buttons operate in 'Direct Mode'. They control up to max 4 receivers.
On a monitor, it is often useful to use the buttons in the Centralised mode: this means having one
button that closes all the shutters, another that turns off all the lights, etc.
To do this, you must Centralise on 'Radio Bus'.
First of all, the receivers must be gathered together to create a Radio Bus R1 R1, then the button
must be 'Connected' to the closest receiver and finally, the Button Centralised Mode must be
defined, specifying whether it should act on all the Lights or on all the Shutters, or both.
By selecting the button 'Mode', it is then possible to define the mode:
Radio Bus M 6 or Direct M 5.
If the 'Radio Bus' mode has been selected, a new icon will be displayed in the higher-level menu,
allowing to select whether Centralisation should act on the Lights (default setting) or on the
Shutters or both. .
DS1722-090 LBT20157
8