All manuals and user guides at all-guides.com
1.1.6.1 Exporting Yokis Buttons to a remote control
Choose the second Menu item: 'Export Yokis Buttons to Remote'.
Tap 'Do it'.
A Wizard will start to guide the installer through the exporting procedure: follow the Wizard
instructions.
This procedure is also useful to directly duplicate a configuration to a second monitor.
1.1.6.2 Resetting all Radio Bus Access Points
Select the third Menu item: 'Reset Yokis Radio Bus Acces Points'
Tap 'Do it'.
The use of Access Points has been described further above.
They are used when you wish to control a specific remote receiver (or even more than one),
located on Radio Bus.
More information in 'E: Range extension with RADIO BUS' and 'E-1: Definition of an Access Point
to the Radio Buso' of the Yokis 'Radio Quick Installation Guide'.
This option can be used to delete all the Access Points of all the buttons on the monitor at the
same time
Controlled by
M
24.
.
1.1.7 Button Resetting
Select the fourth and last Menu item: 'Reset All 13 Buttons'
Tap 'Do it'.
Used to delete the configuration parameters of all 13 Buttons (8 Yokis buttons, 4 Composite
buttons and the Stair Light button).
As regards the Yokis Buttons, it is the equivalent of
M
25.
The names of the buttons are reset at the same time.
DS1722-090
LBT20157
18