Buttons Configuration - urmet domus Mininote+ 1722/85 Installation Manual

1.1 BUTTONS CONFIGURATION

There are three possible modes. Installers can choose the one most suited to their requirements.
A) Yokis Buttons Direct Configuration
The (virtual) Yokis Buttons can be entirely configured directly via the monitor.
The advantage consists in a more user-friendly configuration via a wizard-type interface:
the monitor automatically manages the necessary pulses for Yokis button configuration.
It is necessary to press the 'Connect' button on the receivers in this step.
B) Yokis Buttons Configuration via remote control
When a physical remote control TLC8CP is used, its 8 (or less) buttons can be configured
so as to control home automation. Then, the physical remote control is 'copied' to the
(virtual) Yokis Buttons on the apartment monitor (or multiple apartment monitors).
The advantage in this case is given by the fact that it is easier to reach the receivers in
order to implement the required 'Connections' (pressing the 'Connect' button on the
receivers).
For the physical remote control configuration it is necessary to proceed with the correct
pulse number on 'Connect' button, as mentioned in the tables.
The manuals supplied with the receivers and the remote control should be used for
reference. The Yokis Radio Quick Installation Guide should also be referred to.
C) Mixed configuration
A TLC8CP remote control is used only to establish the required 'Connections' with the
receivers (by pressing 'Connect').
Then the remote control is 'copied' to the (virtual) Yokis Buttons of the monitor.
Finally, the Yokis Buttons configuration is completed via the monitor.
In this way, the advantages offered by the solutions A and B are combined.
DS1722-090
All manuals and user guides at all-guides.com
4
LBT20157