All manuals and user guides at all-guides.com
1.1.1 Yokis Buttons Direct Configuration
Each Yokis Button can be configured to control one or more activation modules (Scenario or
Centralisation Scenario), either in Direct Mode or in Radio Bus Mode.
Please refer to the Yokis 'Radio Quick Installation Guide' for more information on the available
options.
From the monitor Home Page, press the icon 'Settings'
and then select 'Yokis'
.
You will obtain access to the following page:
The Yokis buttons are the first top 8.
The Composite buttons are the last bottom 4.
Tap the Yokis button that you wish to configure. A screen page will open where you can set:
-
The button NAME (which the user will then see)
After typing in a name via the keypad, access the icons at the bottom; these can be used to carry
out the same configurations which can normally be programmed via a Yokis remote control button.
DS1722-090
LBT20157
5