urmet domus Mininote+ 1722/85 Installation Manual page 6

All manuals and user guides at all-guides.com
Before describing the individual controls in detail, we would like to provide some general
indications.
?
First of all, by tapping in the bottom right corner of Yokis settings, a QR code is displayed:
The QR code can be used to access the configuration guide for help.
The buttons configuration procedure is entirely similar to that of the buttons on a Yokis 8-buttons
remote control.
The monitor, however, automatically sends the necessary configuration pulses, without the installer
having to remember the number of pulses needed in the various cases (they are, however,
specified in the text for convenience)
E.g. if you choose to 'Connect' a button to a receiver, the monitor itself will send the required 5
short configuration pulses.
The blue LED on the monitor matches the red LED on a Yokis remote control: it can be checked
for notification flashes. The display shows each time how many notification flashes are to be
expected, to make it easier for the installer to check.
WARNING! Certain configurations may take a few seconds. Always wait for the required
notification flashes before moving on to other operations
.
In all the screens a 'TEST' button is always available on the right side. At the end of a configuration
procedure, the operator can press it to test the behaviour of the button concerned.
DS1722-090 LBT20157
6