Kenmore 111.72695120 Service Manual page 68

10. Disassemble/Assemble Procedures
10-13. Supporter M Draw Rail Assembly.
Step
9
10
11
12
□ Remark :
To avoid risk of electrical shock that can cause death or severe personal injury,
WARNING
!
disconnect unit from power before servicing unless tests require power.
Description
Press the right
fixing hook of the
rail system.
Holding the top of
the Rail, pull it out
a little to release.
Remove one screw
Disconnect two
connectors from
side wall.
Remove one
switch with a thin
flat tool.
※ Follow the reverse order when assembling.
Assemble the harness at the Supporter rail so
that it does not overlap.
67 / 69