Kenmore 111.72695120 Service Manual page 64

10. Disassemble/Assemble Procedures
10-10. Defrost Sensor in the Ice Maker Evaporator Assembly
Step
1
2
Straighten the 4 bent positions of the cover plate.
3
4
□ Remark :
To avoid risk of electrical shock that can cause death or severe personal injury,
WARNING
!
disconnect unit from power before servicing unless tests require power.
Remove eight screw attached
to the cover.
And remove cover.
Swing the cover plate to the right
Cut the sensor wire and remove the defrost sensor on the
right side of the evaporator.
※ Follow the reverse order when assembling.
Description
63 / 69