Kenmore 111.72695120 Service Manual page 58

10. Disassemble/Assemble Procedures
10-4. cover Icemaker
Step
1
2
3
4
□ Remark :
• If the bucket does not fit, turn the helix 90 degree and try again.
To avoid risk of electrical shock that can cause death or severe personal injury,
WARNING
!
disconnect unit from power before servicing unless tests require power.
Description
Hold the bottom of the bucket
and then pull it straight out.
Unscrew and
remove the wires
cover.
Disconnect the connector
of icemaker.
Remove the icemaker.
※ Follow the reverse order when assembling.
57 / 69