Kenmore 111.72695120 Service Manual page 67

10. Disassemble/Assemble Procedures
10-13. Supporter M Draw Rail Assembly.
Step
1
Separate the Case assemble.
2
3
4
□ Remark :
To avoid risk of electrical shock that can cause death or severe personal injury,
WARNING
!
disconnect unit from power before servicing unless tests require power.
Description
Pull a hook to the
right to remove.
Disconnect the one
Connectors.
Remove left and right
the two bolt
※ Follow the reverse order when assembling.
Step
5
Pull a door to the top to remove
6
7
8
Description
release the right
Rail Gear as
same way to
Remove.
Press the left
fixing hook of the
rail system.
Holding the top of
the Rail, pull it out
a little to release.
Disconnect the
one Connectors
From back.
66 / 69