Kenmore 111.72695120 Service Manual page 63

10. Disassemble/Assemble Procedures
10-9. Cover Damper and Insu Damp Covr Assembly
Step
1
2
3
4
□ Remark :
To avoid risk of electrical shock that can cause death or severe personal injury,
WARNING
!
disconnect unit from power before servicing unless tests require power.
Description
Remove one screw
Disconnect the damper
Connectors from back
wall.
Separate the
insulator assemble.
Disconnect the Sensor
Connectors from back
wall.
※ Follow the reverse order when assembling.
Step
5
6
Grasp the tape with both hands and lift it to the
top to remove it.
7
8
Description
Remove the tape from
the floor.
Cut the floor with a knife.
※ Be careful not to cut
Harness
Pull the Harness to
disconnect the sensor.
62 / 69