Planet WBS-900AC-KIT User Manual page 46

Ping Watchdog
Enable Ping Watchdog to continuously monitor the network connection between the CPE unit and a specified
trusted host. If enabled, the CPE unit will periodically send Ping requests to the host, and if there is no response
within a specified time frame, the Ping watchdog will restart the CPE unit.
Object
Enable Ping Watchdog
Host/IP address
Test Host/IP address
Ping interval
Ping fail count to reboot
HTTP port
WNMS
Wireless Network Management System (WNMS) is a centralized monitoring and management system for
wireless network devices. Communication between managed devices and WNMS servers is always initiated by
the WNMS client service running on each device.
Object
Enable WNMS
Server URL
Test Connection
Figure 5-28 Ping Watchdog Configuration
Description
Click to enable Ping Watchdog functionality.
Specify the host to which Ping requests will be sent.
Click this button to check if the specified host responds
successfully.
Specify the time interval between Ping requests in minutes.
Specify the count of Ping reply failures. After the specified Ping
failure count, the CPE unit will automatically restart.
Specify the HTTP port. The standard HTTP port is 80.
Figure 5-29 WNMS Configuration
Description
Select to enable the WNMS agent.
Specify the URL of the WMS server to which heartbeat notifications
will be sent.
Click this button to check if the specified server responds
successfully.
-38-
User Manual of WBS-900AC-KIT