Related Manuals for Planet WBS-900AC-KIT
Summary of Contents for Planet WBS-900AC-KIT
- Page 1 5GHz 802.11ac 900Mbps TDMA Outdoor Long Range Wireless CPE Kit WBS-900AC-KIT Quick Installation Guide...
-
Page 2: Table Of Contents
Table of Contents 1. Package Contents ................. 3 2. Physical Introduction ................5 3. Hardware Installation ................6 4. Wired Network Configuration (Windows) ..........8 5. Entering into the Web Management ............9 6. Easy to Set Up TDMA mode (PtP) Connection ........10 FURTHER INFORMATION ................11... -
Page 3: Package Contents
1. Package Contents Thank you for choosing PLANET TDMA Outdoor Long Range Wireless CPE Kit. Before installing, please verify the contents inside the package box. The "WBS-900AC-KIT" mentioned here is the model name of the device. WBS-900AC CPE x 2... - Page 4 RO, SE, SI, SK, TR, UA. Copyright © PLANET Technology Corp. 2023. Contents are subject to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners. Part No. 2341-E10780-000 If there is any item missing or damaged, please contact the seller immediately.
-
Page 5: Physical Introduction
2. Physical Introduction Hardware Description Reset/Pair PtP Switch DC Power... -
Page 6: Hardware Installation
3. Hardware Installation Step 1: Installing Antenna Set and AP Stand Step 2: Connecting Antenna to CPE with RF Cable... - Page 7 Step 3: Push the latch on the bottom of the Outdoor Wireless CPE to remove the sliding cover. Step 4: Plug the RJ45 Ethernet cable into the PoE Port of the Outdoor Wireless CPE. Then, slide back the cover to finish the installation. Step 5: Place the Outdoor Wireless CPE on the AP stand...
-
Page 8: Wired Network Configuration (Windows)
4. Wired Network Configuration (Windows) A computer with wired Ethernet connection is required for the first-time configuration of the Wireless AP. 1. Click the “Start” button located at the lower-left corner of your computer. 2. Select “Control Panel-> Network and Shari ng Center”. 3. Click “Change adapter settings”. 4. -
Page 9: Entering Into The Web Management
5. Entering into the Web Management Default Master IP Address: 192.168.1.253 Default Slave IP Address: 192.168.1.100 Default Username: admin Default Password: admin Default SSID: PLANET_5G Step 1: Launch the Web browser and enter the default Master IP address http://192.168.1.253. Step 2: The default username and password are “admin”. Then click the LOGIN button to continue. -
Page 10: Easy To Set Up Tdma Mode (Ptp) Connection
6. Easy to Set Up TDMA mode (PtP) Connection Step 1: (1) Position “Slave” to “Master” on the master AP. Stay in “Slave” on the slave AP. (2) Press the “Reset/Pair” button within 2 minutes on both sides. (3) The connection will be established easily. 3 Steps to Set Up TDMA Mode (PtP) Connection Connecting (Master) (Slave) Connected... -
Page 11: Further Information
FURTHER INFORMATION The above steps introduce the simple installations and configurations of the device. For further configurations, please refer to the user manual, which can be downloaded from the website. WBS-900AC-KIT: https://www.planet.com.tw/en/support/downloads?&method=keyword&keyword =WBS&view=3#list...
Need help?
Do you have a question about the WBS-900AC-KIT and is the answer not in the manual?
Questions and answers