Planet WBS-900AC-KIT User Manual page 44

Date and Time
This section can be used to automatically manage the system time and date on the device using the Network
Time Protocol (NTP), or manually manage the system time and date by setting the time and date on the device.
An NTP (Network Time Protocol) client synchronizes the device's clock with the defined time server. To use the
NTP service, select NTP from the configuration menu, select your time zone, and enter the NTP server.
Object
Enable NTP
Time zone
NTP server
Test NTP server
IPv6 DNS server
Remote Management
Use this menu to manage access to the CPE through SSH, Telnet, and HTTP:
Figure 5-25 Date and Time: NTP Configuration
Description
Select this option to enable NTP configuration.
Select time zone. The time zone should be specified as the
difference between local time and GMT.
Specify the trusted NTP server IP or hostname for time
synchronization.
Click this button to check if the specified server responds
successfully.
Specify the IPv6 address of the domain name server.
Figure 5-26 Remote Management Configuration
-36-
User Manual of WBS-900AC-KIT