Click on the desired Ethernet interface name and configure the parameters:
The page includes the following fields:
Object
Mode
Speed, Mbps
Duplex
Auto-negotiation
Network Mode: Bridge
When configuring the device in bridge mode, you only need to configure the device's LAN settings on the
"Network Configuration" page:
Figure 5-21 Ethernet Interface Settings
Description
Select the configuration mode of the Ethernet port: auto, fixed,
advanced.
Select the Ethernet link speed for a specific Ethernet port.
Select the duplex mode for a specific Ethernet port in the country
where the device is operating.
Select the automatic negotiation to advertise and negotiate the
Ethernet link duplex configuration (half/full) to obtain the highest
possible data rate.
Figure 5-22 Bridge Mode Settings
-33-
User Manual of WBS-900AC-KIT