Planet WBS-900AC-KIT User Manual page 42

The page includes the following fields:
IPv4 configuration.
Object
IP method
IP address
Subnet mask
Default gateway
DNS server
Secondary IP
Click the "Enabled IPv6" tab to enable IPv6 configuration. The IPv6 settings will appear in the IPv6 configuration
section:
IPv6 configuration.
Object
IPv6 method
IPv6 address
IPv6 prefix length
IPv6 default gateway
IPv6 DNS server
Description
Static - the IP address must be manually configured.
Dynamic - the IP address of this device will be assigned by the
DHCP server.
The device's IP address.
Specify the device's subnet mask.
Specify the device's gateway IP address.
Specify the domain name server.
Specify the backup IP address and subnet mask managed by the
CPE.
Description
Static - the DHCPv6 client only obtains network parameters other
than the IPv6 address.
Dynamic - the DHCPv6 client requires both the IPv6 address and
other network parameters (such as DNS server, domain name,
etc.).
Configure the IPv6 address of the interface.
Enter the prefix length of the address.
Specify the IPv6 address of the default gateway.
Specify the IPv6 address of the domain name server.
-34-
User Manual of WBS-900AC-KIT