Power Considerations - Agilent Technologies 1260 Infinity II User Manual

Introduction

Power Considerations

WARNING
•
•
•
•
•
•
•
•
Multi-Angle Light Scattering Detector User Manual
Ground the instrument.
To prevent electric shock in the event of an accident or electrical discharge,
the detector must be connected to protective earth. This is also important
to ensure stable operation and good data signals.
Ensure that all connected devices are grounded via the mains connector as
well.
Do not place heavy objects onto the power cord and keep any hot objects
away. This can damage the cord, resulting in fire, electrical shock, or
malfunction. If the cord is damaged, immediately unplug the mains power
cord and contact your Agilent representative.
Never modify the supplied power cord. Do not bend it excessively or pull on
it. Failure to do so could damage the cord, resulting in fire, electrical shock,
or malfunction.
Never replace the detachable power cord by an inadequately rated cord.
This can result in fire, electrical shock, or malfunction.
The power supply voltages and power consumption of this instrument are
listed in table "Physical Specifications"
only to a power supply of the voltage indicated. Otherwise, fire or electric
shock may occur. Ensure that the power supply voltage is stable and has
sufficiently constant current capacity to operate all the components of the
system. If not, the detector will not operate at its rated performance levels.
If the power cord or its insulation gets damaged, unplug the cord and
contact your Agilent representative for a replacement cable immediately.
Only use mains connection cables admitted for use in your country. We
strongly recommend to only use cables supplied by Agilent.
In case of danger, immediately unplug the mains power cord either at the
wall power outlet, the power strip or on the rear of the devices.
on page 23. Connect the detector
10