Table of Contents
Advertisement
Installation
Safety
Considerations
Initial Inspection
here are no hazardous voltages in this detector.
1. Check the shipping container and packaging material for damage.
2. Check that the shipment is complete.
3. Check connector, cable, and detector body for mechanical damage.
4. Check the detector electrically:
Either make a measurement or test to speci cations. (See Chapter
3, \Operation" or Chapter 4, \Performance ests.")
If any of the following conditions exist, notify your nearest Agilent
oce:
incomplete shipment
mechanical damage or defect
failed electrical test
If you nd damage or signs of stress to the shipping container or the
cushioning material, keep them for the carrier's inspection. Agilent
does not wait for a claim settlement before arranging for repair or
replacement.
2
Installation 2-1
Advertisement
Table of Contents
