Connection & Installation - Amcrest IP8M-TB2886EW-AI User Manual

Network Access
The camera can be accessed remotely from a wide variety of internet connected devices, including PCs, Mac, iOS,
and Android devices using a P2P connection or IP address. Use the UPnP or other protocols to allow remote and
local connection with a large variety of network hardware.
Cloud Storage Functionality
Amcrest offers premium cloud storage options to enable long-term storage. Amcrest Cloud also allows the user to
easily locate and view recordings for playback from any internet connected computer or smartphone (iOS/Android).
Device Overview
The images below show the dimensions for the camera. The measurements are in millimeters (mm):
Connection & Installation
This section provides information about the connection and installation of your camera.
MicroSD Card Installation Guide
If using a microSD card, please make sure the microSD card is installed before physical installation of your camera.
To Install a microSD card into your camera, please refer to the step-by-step guide below:
Note: A microSD card with a max of 256GB can be used. Please make sure the microSD card is properly formatted to
FAT32 and is classified as class 10 or above before installing
1. Locate the hatch on the bottom of the camera. Use the included torx wrench to remove the hatch.
2. Locate the microSD card slot and insert the microSD card into the slot. Press in to secure the card into the slot.
3. Place the hatch back onto the camera and secure it to the camera using the included torx wrench.
5