Fitting The End Covers - Renishaw QUANTiC RTLC40 Installation Manual

Fitting the end covers

The end cover kit is designed to be used with FASTRACK to provide protection for exposed
scale ends.
NOTE: End covers are optional and can be fitted before or after readhead installation.
1. Remove the backing tape from the adhesive tape on the back of the end cover.
2. Place the end cover at the end of the FASTRACK ensuring a gap of at least 1 mm between
the end of the scale and the end cover.
Ensure a gap > 1 mm
www.renishaw.com 19